Search:

Call Us Now: (02) 9534 5122

LC-R127R2P1

Related Products


12SB7.2P-F2
You Save:$23.31 (42.5%)
Sale Price:$
Qty:     
Shipping & Handling Calculator:

Post Code:
Model No LC-R127R2P1
Selling Unit EACH
Description Panasonic LC-R127R2P1 Sealed Lead Acid / VRLA UPS Battery / Home Alarm / NBN Approved
Application Cyclic & Standby,UPS, Security, Alarm, Instrument, Test Equipment, Toy, Medical Equipment
Chemistry Sealed Lead
Voltage 12V
Nominal Capacity 7200mAh
Brand Panasonic
Width 64.5mm
Height 94mm
Length/Breadth/Depth 151mm
Weight 2470g
Weight(kg) 2.47
Brand Panasonic
Comments

Same as LC-R127R2P except with 6.35mm wide terminals instead of 4.8mm wide.


STEP BY STEP PROCEDURE TO CHANGE YOUR HOME ALARM BATTERIES

The majority of home alarm batteries are 12 Volt 7 Amp Hour the batteries are 150mm long 65mm wide and 95mm high, available from Batteries Direct the batteries will always be the same dimensions however the Amp Hour rating of the battery may vary between brands this does not affect the performance of the alarm.

It is a simple procedure to change the battery and can save you many $$$

When the Battery light shows it is time to replace the battery this is usually evey 3-5 years

The usual procedure to change the battery is:

1. Open the panel (the battery is usually located inside)

2. The Tamper alarm will sound

3. Enter your Pin Number this will turn the alarm off

4. Check the battery Part Number, Size, Voltage and Amp Hour rating of the battery

5. Close the Panel Re-Enter your Pin Number to set the Alarm, then in some cases again to put the alarm on standby

When you have purchased your 12 Volt 7 Amp Hour battery repeat 1-3

6. Take care not to pull on the wires when removing the battery connectors and make sure you replace them on the corresponding terminal of the new battery

The repeat step 5

CONGATULATIONS YOU HAVE JUST SAVE YOURSELF $50 TO $100.00

NBN Battery Replacement

With the on-going NBN (National Broadband Network) roll out spreading across Australia, the replacement battery market will certainly follow suit.

Customers who opt for the Battery Backup service for their power supply are supplied with a 12V 7.2Ah battery as part of the package. When this battery requires replacing, they are encouraged to download the following document, and told to take it to a battery retailer.

Form here - http://www.nbnco.com.au/content/dam/nbnco/documents/NBN-power-supply-battery-backup-battery-specification.pdf

The specifications released are outlined below:
Battery Type:   12V 7.0-7.2Ah 6cell VRLA Sealed Lead Acid Battery
Dimensions:    150mm (W) x 94mm (H) x 64mm (D)
Terminals:       Quick Disconnect F2 - 6.35mm(W) x 0.81mm(T) Faston Tab terminals
                     These are to be located 8mm from the side edge of the battery casing and 12-24mm from the top edge of the battery casing. Only batteries that have terminals in these exact locations will function.
 

Optional equivalents available from our website
Product Terminal      
Application    
Century PS1270L F2
Stand By
Century PS1270S F1
Stand By
Drypower 12SB7.2P-F1 F1
Multi Use
Drypower 12SB7.2P-F2 F2
Multi Use
Drypower 12SB7P-F1 F1 Stand By
Fullriver DC7-12 F2
Cyclic
Fusion CB12V7.5AH F1
Stand By
Fusion CBC12V8.0AH F2
Cyclic
Fusion V-LFP-12-7.5 F2
Stand By
Panasonic LC-R127R2P F1
Multi Use
Panasonic LC-R127R2P1 F2
Multi Use
Panasonic UP-VW1236P1 F2
Stand By
Panasonic UP-VW1245P1 F2
Stand By
Remco RM12.7.2DC F1
Cyclic
Remco RM12-7.2 F1
Stand By
TAICO TP1270 F1
Multi Use

Terminal
F1 - 4.75mm Spade Terminals
F2 - 6.35mm Spade Terminals

Application
Cyclic - Deep cycle applications
Stand By - Stand by applications use for USP, home alarm etc
Multi Use - Can be use for both Deep cycle and Stand by applications




12v7a 1272 alarm battery battery for house alarm 12-7

Enjoy safe and secure
shopping & checkout using
   
» About
» About Us
» Help & Advice
» Terms & Conditions
» Delivery Options
» Returns Policy
» FAQ
» Get Social
» Facebook
» YouTube

2004 - 2016 Batteries Direct