Bluetooth Smart enabled
The Blue Smart IP22 Charger is the wireless solution to monitor voltage
and current, to change settings and to update the charger when new
features become available.
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard.
And once the battery is fully charged, power consumption reduces to 0,5
Watt, some five to ten times better than the industry standard.
Adaptive 6 - stage charge algorithm: test - bulk – absorption - recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’
battery management. The adaptive feature will automatically optimize the
charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to
discharge during 24 hours. In the storage mode float voltage is reduced
to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and
corrosion of the positive plates. Once a week the voltage is raised back
to the absorption level to ‘equalize’ the battery. This feature
prevents stratification of the electrolyte and sulfation, a major cause
of early battery failure.
Also charges Li-ion (LiFePO4) batteries
LiFePO4 batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 25% of
the nominal output and the charger will be totally noiseless. The NIGHT
mode automatically ends after 8 hours. The LOW mode can be ended
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY.
MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION
Inside the box
Note: Cables from charger to battery is not included, Click here for cable options
The battery is charged, smartly... to perfect condition
The seven-step charging algorithm gets the best out of
your battery. The charger gives the battery the power it needs,
maintains its health, ensures better performance... and a longer life.
Recovery of deeply-discharged 'dead' batteries
Unlike other brands, the Blue Smart IP65 Charger will
attempt to recharge a deeply-discharged battery by force-feeding it with
a low current. Normal charging will then be resumed as soon as there is
sufficient voltage across the battery terminals.
|VictronConnect lets you get live status information and configure any Victron products which either
|have Bluetooth built in, or are connected to a VE.Direct Bluetooth Smart Dongle , or
|VE.Direct to USB Interface .
|Find out more about VictronConnect here or download the Apps below